Vaddio unveils mounting systems for Robotic PTZ Cameras

Vaddio, the manufacturer and OEM distributor of specialty
PTZ cameras and high-end camera control systems used in the broadcasting,
audio/visual and videoconferencing industries, unveiled newly redesigned
IN-Wall Enclosures for a variety of the industry’s leading robotic PTZ cameras.

Vaddio’s innovative IN-Wall Enclosures are an attractive way to
mount PTZ
cameras on a wall where room aesthetics are critical. They use the depth of the
wall cavity to recess the camera in to the wall, minimizing the camera’s
extension into the room providing a more finished look. In addition, each
enclosure has 3 conduit knockouts and a cable access slot for easy cable
installation.

“Vaddio’s completely redesigned IN-Wall Enclosures are designed to
complement today’s trend in flat panel displays where the displays are
installed flush to the wall. By using the Vaddio IN-Wall Enclosures the camera
can also be flushed into the wall and be balance the overall system design.”
Stated Rob Sheeley, president and CEO of Vaddio. “Our IN-Wall Enclosures really
simplify installation requirements as the contractor no longer has to build
custom soffits or custom camera enclosures.”

These systems are designed and sized to fit the leading robotic PTZ cameras
from Sony, Canon, Polycom, TANDBERG and LifeSize, as well as the Vaddio
EZCamera Interface Module (EZIM) in the back of the box to enable use of Cat. 5
Cabling. Each system consists of an in-wall mounting box and face frame that
are both powder coated white, but can be painted to match any d cor.